The perfect complement to your Solo Rescue and DeconWasher Pro S. An easy and safe way of reducing carcinogens from your wastewater.
The DeconFilter Pro S focuses on extracting and reducing the amount of carcinogenic PAH substances in the Solo Rescue and DeconWasher Pro S wastewater. During tests at a fire department and firefighter training facility in southern Sweden, wastewater samples were taken from the Solo Rescue decon washer after several training exercises and rescue operations. They were then sent to an external third-party laboratory for testing. These lab tests showed that the DeconFilter Pro S reduced the amount of PAH M and PAH H compounds (both of which are currently being classified as carcinogenic by the Swedish EPA) in the wastewater by up to 98% or below the detection level.
We use a multi-stage custom filtration to achieve these results, including a lint filter, particle filters, and an active carbon filter. This allows us to catch particles of various types and sizes and prevents them from being flushed down the drain.
The DeconFilter Pro S was developed to work seamlessly with the Solo Rescue and DeconWasher Pro S and fits perfectly on the right side of the machines using a special filter rack. It is also possible to mount the filter system on the wall for convenience if needed. The Solo Rescue filter system comes with an external water tank, including a lint filter and drain pump. This is not required for the DeconWasher Pro S since this is already built into the machine.
To ensure the efficiency of the filter system, we recommend using a filter kit replacement four times per year. However, depending on the type of fire and how often the water in the machine is changed, the filter lifetime may vary.
To make the filter exchange as easy and safe as possible, it has an open design that allows you to reach the filter cartridges on the side of the machine effortlessly.
When we first developed the Solo Rescue decon washer our goal was to develop a decontamination solution that could help reduce firefighter’s exposure to carcinogens and other hazardous substances in a quick, easy and safe way. We ended up doing a great job and our machines have now been shipped throughout the world to countries on four different continents. However, the optimized cleaning process did not mean our job was completed. The contaminated water also needs to be taken care of after the wash, and that is why we developed the DeconFilter Pro S.
The most common solution for taking care of the contaminated water today, whether it is from manual washing or from using a Solo Rescue decon washer, is to simply flush it down the drain where it eventually will end up at the local wastewater treatment plant. However, most wastewater treatment plants do not have a specified procedure to extract these PAH compounds, which will eventually result in them contaminating the surrounding environment and ecosystem.
Because of the toxic nature of these chemical compounds, we decided that this is not good enough. Even though our primary focus is to improve the health of firefighters and help them avoid toxic chemicals, we could not ignore the negative indirect effects that contaminated wastewater could have on the local environment, and decided to do something about it. The solution we came up with was the DeconFilter Pro S.
| Dimensions H x W x D | Extend the width of the machine by approximately 300 mm |
| Weight (empty) | 70 kg |
| Filer tank volume | 130 liters |
| Voltage | 220-240 V |
| Fuse | 10 A |
| Frequency | 50 Hz |
| power | 0,55 kW |
| Drain hose connection | 3/4” (19 mm) |
| Minimum drain capacity min. | 35 l/min |
| Drain outlet height on wall max. | 1,5 m |
| Filtration technology | Multi stage custom filtation including lint filter, particle filters and active carbon filter |
| Pump | Stainless steel, high temp, handle solids up to 10 mm. |
| Capacity | Up to 3 Solo Rescue Decon Washers |
| Options | Wall mount acessory |
| Filter change recommendation | Every three months, or according to indicator. More often depending on application. |
RESCUE Intellitech disclaims any and all liability for any damages or injury to persons, property or otherwise resulting from misuse or failure to follow instructions found in the Owners Manual, failure to wear hand and face protection when changing filter cartridges, and or replacing filters with cartridges that are not supplied by RESCUE Intellitech or their appointed representatives. |
|
Cancer – the Number One Cause of Death Among Firefighters
According to numerous studies cancer is the number one cause of death among firefighters. In North America cancer caused 61% of the career firefighter line-of-duty deaths from January 1, 2002, to March 31, 2017. Firefighters also run a 9% higher risk of being diagnosed with cancer and a 14% higher risk of dying from cancer than the general population.
How to clean your PPE equipment
In order to minimize the risk for firefighters of being diagnosed with cancer we need to minimize their exposure to cancer causing toxic chemicals such as PAH particles. One way of doing that is trough thorough cleaning and decontamination of the PPE equipment. There are a few things to always bare in mind while doing so.
